GENERAL SETTING

PASSWORD SET setting

For network connection there are three access levels, each of which has a password. Each password can consist of a combination of 4 to 8 alphanumeric symbols.

Note: The cursor cannot be moved to ID or PASSWORD (4-8).

<NETWORK SET>

 

 

LAN CARD

:

LAN1

 

 

NETWORK CONTROL :

ON (DISPLAY: ON)

IP ADDRESS

:

192.168.

0.

1

SUBNET MASK

:

255.255.255.

0

GATEWAY

:

0. 0.

0.

0

PORT

:

00080

 

 

ID

:

PASSWORD (4-8)

 

ID1

:

1111----

 

 

ID2

:

2222----

 

 

ID3

:

3333----

 

 

Example: Set AB123456 as the ID1 password.

1 Use the jog dial to move the cursor to ID1, and then turn the shuttle dial clockwise.

The initial digit 1 of the password entry flashes.

•The characters that can be used in the password are: 0, 1 ...

9, A, B ... Z

Note:

•ΙΔ1:This level can only observe a live image through the network.

•ΙΔ2:This level can observe a live image and play back and search recorded images through the network.

•ΙΔ3:This level allows all digital video recorder operations and settings to be carried out.

2 Use the jog dial to display “ A” , and then turn the shuttle dial.

The second digit 1 flashes.

ID1

: A111----

3 Use the jog dial to display “ B” , and then turn the shuttle dial.

The third digit 1 flashes.

ID1

: AB11----

 

 

 

4 Repeat this procedure to continue entering

“ 123456” , and

then turn the shuttle dial clockwise.

 

 

 

The cursor moves to ID2.

 

 

 

 

PORT

:

00080

 

 

 

ID

:

PASSWORD (4-8)

 

 

ID1

:

AB123456

 

 

ID2

:

2222----

 

 

 

ID3

:

3333----

 

5 As required, use the same procedure to set passwords for ID2 and ID3, and then turn the shuttle dial clockwise.

The cursor moves to LAN CARD.

6 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT,OSD

7 Computer operation

Refer to the separate Manual for Remote Operation by Network Connection.

English

79