Sanyo DVC-2600 Connections Basic TV Connections, Optional, Preferred TV Connections

Models: DVC-2600

1 36
Download 36 pages 19.42 Kb
Page 12
Image 12

Connections (Continued)

Basic TV Connections

Make one of the following connections, depending on the capabilities of your existing equipment.

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).

Note

If you use this connection, tune the TV to the DVD+VCR’s RF output channel (CH 3 or 4).

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold CHANNEL (v/V) on the front panel for about five seconds.

It will turn itself on and “RF 03” or “RF 04” appears in the display window.

2.Press CHANNEL (v/V) on the front panel or CH/TRK (v/V) on the remote control to change the RF output channel (CH 03 or CH 04).

3.Turn off and on the DVD+VCR.

Audio/Video connection

1DVD+VCR to the video in jack on the TV using the video cable supplied (V).Connect the DVD/VCR VIDEO OUT jack on the

Connect the Left and Right DVD/VCR AUDIO OUT

2 jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.

Note

If you use this connection, set the TV’s source selector to VIDEO.

Rear of TV

ANTENNA

AUDIO INPUT

VIDEO

INPUT

INPUT

 

 

 

L

R

 

R

A1

V

Rear of DVD+VCR

Optional, Preferred TV Connections

Notes

You can ONLY watch and listen to DVD playback through the connections shown below.

When using the COMPONENT VIDEO OUT jacks, set the video output select switch to COMPO- NENT. When using the S-VIDEO OUT jack, set the video output select switch to S-VIDEO.

S-Video connection

1to the S-Video in jack on the TV using the optional S-Video cable (S).Connect the S-VIDEO OUT jack on the DVD+VCR

2the DVD+VCR to the audio left/right in jacks on the TV using the supplied audio cables (A2).Connect the Left and Right AUDIO OUT jacks of

Component Video (Color Stream®) connection

1the DVD+VCR to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).Connect the COMPONENT VIDEO OUT jacks on

2the DVD+VCR to the audio left/right in jacks on the TV (A2) using the supplied audio cables.Connect the Left and Right AUDIO OUT jacks of

Rear of TV

S-VIDEO

COMPONENT VIDEO INPUT

AUDIO INPUT

INPUT

 

 

 

 

 

 

Pr

Pb

Y

R

L

S

C

A2

Rear of DVD+VCR

12

Page 12
Image 12
Sanyo DVC-2600 instruction manual Connections Basic TV Connections, Optional, Preferred TV Connections