Before Operation - DVD Part (Continued)
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select Stream/PCM if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.
PCM: Select when connected to a 2 channel digital stereo amplifier. The DVD+VCR output sounds in the PCM 2ch format when you play a DVD video disc recorded with a Dolby Digital, MPEG1, or MPEG2 recording system.
Disc Audio | DIGITALDOLBY /PCM |
Disc Subtitle | Stream/PCM |
Disc Menu | PCM |
Rating |
|
Country Code | Sample Freq. |
TV Aspect | 48 KHz |
Menu Language | 96KHz |
Digital Audio Output |
|
Others |
|
Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.
Others
The DRC and Vocal settings can be changed. Use v/V to select the desired option and press SELECT/ENTER. The setting of the selected option is changed between On and Off.
Disc Audio | DRC On |
Disc Subtitle | Vocal On |
Disc Menu |
|
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.
Vocal
Set Vocal to On only when a
PREPARATION
19
