Sanyo DWM-390 instruction manual Using RF Modulator, Jacks, Vcr

Using RF Modulator

If your TV does not have a Video input jack and has an antenna terminal only, please purchase the *RF Modulator (not supplied). (*Please consult your audio/video dealer.)

Example: DVD video player, TV and RF Modulator connections

Audio/Video cable (supplied)

To AUDIO

OUT jacks

	(Red)R	(White)L
		COMPONENT VIDEO OUT
	Y	PB	PR
	VIDEO OUT
	SELECT
	S
S-VIDEO OUT	R	L
	COMPONENT	AUDIO OUT	VIDEO OUT

DVD video player

jack(Yellow) OUTVIDEO To

3

To AC 120V, 60Hz

RF Modulator

To video input

jack(Yellow)

To audio input jacks

	(Red)R	L	1
		(White)
A/V INPUT JACKS		TO TV	ANT. IN
		CHANNEL
VIDEO	R-AUDIO-L	3	4
		4	VHF/UHF
			ANTENNA
			IN

TV

1.Connect the antenna cable (not supplied) to the ANT. IN terminal of the RF Modulator.

2.Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV.

3.Connect the Audio/Video cable (supplied) between the AUDIO OUT and VIDEO OUT jacks of the DVD video player and the AUDIO INPUT and VIDEO INPUT jacks of the RF Modulator.

2

4.Turn on the TV, and set the channel number (CHANNEL3 or CHANNEL4) on both TV and RF Modulator, whichever is not used for regular broadcasts in your area.

Note:

For more details, please refer to the instruction manual of the RF Modulator.

Example: DVD video player, VCR, TV and RF Modulator connections

Audio/Video cable (supplied)

To AUDIO

OUT jacks

	(Red)R	(White)L
		COMPONENT VIDEO OUT
	Y	PB	PR
	VIDEO OUT
	SELECT
	S
S-VIDEO OUT	R	L
	COMPONENT	AUDIO OUT	VIDEO OUT

DVD video player

OUTjack(Yellow)	4
	To AC 120V,
	60Hz
VIDEOTo	RF Modulator

TV

To video input

	To audio input
jack(Yellow)	jacks		1
	R(Red)	L(White)
			2			VHF/UHF
						FROM ANT.
A/V INPUT JACKS		TO TV	ANT. IN			IN
		CHANNEL
VIDEO	R-AUDIO-L	3 4				TO TV
		5		3	4	OUT
			5
				CHANNEL

VHF/UHF

ANTENNA

IN

3

VCR

1.Connect the antenna cable (not supplied) to the VHF/UHF FROM ANT IN terminal of the VCR.

2.Connect the 75-ohm coaxial cable (not supplied) between the TO TV OUT terminal of the VCR and the ANT. IN terminal of the RF Modulator.

3.Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV.

4.Connect the Audio/Video cable (supplied) between the AUDIO OUT and VIDEO OUT jacks of the DVD video player and the AUDIO INPUT and VIDEO INPUT jacks of the RF Modulator.

5.Turn on the TV, and set the channel number (CHANNEL3 or CHANNEL4) on all TV, VCR and RF Modulator, whichever

is not used for regular broadcasts in your area. Note:

For more details, please refer to the instruction manual of the RF Modulator.

-E9-