OPERATION

Mono/stereo

Press A-B MO/ST button on remote control to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation.

Mute

Press MUTE button on remote control to cut down sound output. Press it again to resume the previous volume mode.

When in the default menu, the “MUTE” will appear on the screen display.Menu Control operation in radio mode

When you press MODE to select radio mode, the menu appears, Press SEL button on remote control to select VOLUME, then you can press CH / buttons to select the item upward or downward to switch between VOLUME, BASS, TREBLE, BALANCE, FADER, LOUD and EQ mode. Then press VOL+/- buttons to adjust the selected item. The corresponding value will show on the display.

FM1 98.10 MHz

MONO

VOLUME

 

40

M1

87.50

BASS

-2

M2

90.10

TREBLE

-2

M3

98.10

BALANCE

L-R

M4

106.10

FADER

F-R

M5

108.00

LOUD

ON

M6

87.50

EQ

POP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When you select EQ item, there are four audio modes to be selected:

FLAT POP ROCK CLASSIC

TV OPERATIONSwitching to TV modePress MODE button on remote control to select TV mode.Auto searching TV channels

Press GOTO (AUTO) button for several seconds on remote control to start search channel automatically.

In the course of searching, press CH button to stop searching.

Selecting channel

-Press CH button on remote control to choose channel upward and press CH button on remote control to choose channel downward.

-The numeric buttons (0,1~9) allow you to select the corresponding channel directly.

-Press digital select button 10+(-/--) cooperatively used with numeric buttons to select channel desired.

For example, when you want select 16 channel, press10+(-/--) to switch between “-“ and “--“, when the “--“ appears on the display, you can press “1 “button then press “6” button to select 16 channel.

Mute

Press MUTE button on remote control to cut down sound output. Press it again to resume the previous volume mode.

Screen display

Press TITLE (DSP) button on remote control to display the current status such as TVch. If you don’t operate over five seconds, the information on the screen will disappear.

Menu Control operation in TV mode

Press SEL button on remote control to enter sound menu, then you can press CH / buttons to select the

26