Sanyo Table of Contents, ■Accessories, ■Check your operating environment, ■You can automatically set up the IP address of the camera, • PC

Table of Contents
Name and Function of Each Component	................................................................. 2
Basic Connections....................................................................................................	5
Alarm Terminal Connections.....................................................................................	6
Lens Adjustment.......................................................................................................	7
Network Settings ....................................................................................................	10
Specifications .........................................................................................................	11
Copyright Notice .............................................................	See “Side B” of this manual.

■Accessories

① Video Cable	④ Clamping Core
② Cable holder for wiring	To prevent electromagnetic interference
③ CD-ROM
	VCC-HD2500P	VCC-HD2300P
		VCC-HD2100P

■Check your operating environment.

To operate the camera via network operation, you must meet the following operating requirements.

• PC : IBM PC/AT compatible

•Operating system : Windows XP Professional/Windows Vista

• CPU	: Core2Duo E6700 2.66 GHz or higher
• Memory	: Windows XP: 1GB or more
	Windows Vista: 2GB or more

•Network interface : 10Base-T/100Base-TX (RJ-45 connector)

• Display card	: 1920×1200 pixels or higher
• Graphics chip	: ATI RADEON HD2600 series or higher
	nVIDIA GeForce 8600 series or higher
	nVIDIA Quadro FX550 series or higher
• Web browser	: Internet Explorer Ver. 6.0 SP2 or higher,
	or Internet Explorer Ver. 7.0

■You can automatically set up the IP address of the camera.

This software application is useful when two or more cameras are connected to the network.

Download “AUTO IP SETUP” software application from the supplied CD-ROM.

1