Sanyo LNS-S30, LNS-S31 manual Lens Lock Latches, Fig-4, Fig-5, Fig-3

3REMOVE THE LENS (See Figure-3 and 4)

1. Remove the lens motor connector from terminal.

2.Loosen the screws-B (2 screws) which fastens the lens. (Use the driver included with the lens to loosen the screws.)

3.Slide the lens lock latches to "UNLOCK" position and remove the lens.

Be careful not to drop the lens when removing the screws. After using, save the driver for latter use.

SCREW "B"

LENS LOCK

LATCHES

CONNECTOR Fig-3

TERMINAL

LENS LOCK LATCHES

LOCK

POSITION

UNLOCK

POSITION

Fig-4

4MOUNT THE LENS (See Figure-5)

1. Remove protective caps (front and back) on the	LENS MOUNTING
lens.	BRACKET
2. Mount the lens on lens mounting bracket with
Upper 2 screws. (locate motor on left side).	DRIVER
Use the driver included with the lens to fasten the	IN THE LENS
screws.
3. Slide the lens lock latches to "LOCK" position and
lock the lens. (See Figure-4)

4.Connect the lens motor connector to terminal.

(See Figure-3) Fig-5

-3-