Repeat playing mode
Press the REPEAT button repeatedly to select a repeat play mode available. Each time the button is pressed, the mode changes as shown below:
[CD]
“REPEAT” blinks |
| “REPEAT” appears |
| ||
(Repeat one track) | (Repeat all tracks) | |
Released (Normal play)
PROGRAMMED PLAY
Up to 20 tracks on a disc can be programmed for play in any order.
-To begin the programming procedure, set function switch to “CD” first.
-The same track can be programmed more than once.
-Load a disc that you want to programme be- fore starting programmed play.
1.Press the STOP n button if necessary.
2.Press the MEMORY button, the “01” and “MEMORY” blink.
MEMORY
3.Select a track by using the f or e but- ton.
MEMORY
4. Press the MEMORY button.
MEMORY
5.Repeat steps 3 - 4 to programme addition- al tracks.
6.Press the PLAY/PAUSE i button to start playback. “MEMORY” remains lit.
MEMORY
When all programmed tracks have been played, the player stops automatically.
-The programme contents are retained in memory.
-Any attempt to programme more than 20 tracks will result in discontinuous of the programming.
-To cancel programmed play, press the STOP n button twice during play.
Checking the programme
In stop mode when MEMORY remains lit press the MEMORY button once, the pro- grammed details sequentially appear on the display.
Changing a programme
To add a new track to a programme:
1.In the stop mode, press the MEMORY but- ton repeatedly until last programme number is displayed.
2.Select a track as explained above.
3.Press the MEMORY button.
To change a track:
1.In the stop mode, press the MEMORY button repeatedly until the programme number to be replaced is displayed.
2.Select a track as explained above.
3.Press the MEMORY button.
Note:
Programmed details cannot be partially deleted or inserted.
WHAT TO DO IF...
If an abnormal display indication or an operating problem occurs, disconnect the mains lead and remove all batteries. Wait at least 5 seconds then reconnect the mains lead and reinstall the batteries. Resume the operation.
- 5 -
540AU.indd 5
2009.4.8 10:11:18 AM 
