Sanyo MCD-ZX541F Listening To The Radio, Recording, When beat is heard, To improve reception

LISTENING TO THE RADIO

1.Set the FUNCTION switch to RADIO.

2.Select the desired radio band with the BAND switch.

3.Tune in a desired station by turning the TUNING control.

4.To turn the radio off, set the FUNCTION switch to TAPE/OFF or CD or LINE IN.

To receive FM stereo broadcasts

Set the FM MODE select switch (the back of the unit) to ST.

-If the signal from an FM stereo station is weak and reception is poor, set the FM MODE select switch to MONO. The reception may be improved, but the sound will be monaural.

To improve reception

FM: Pull out the telescopic aerial and adjust its position.

AM: Rotate the unit.

RECORDING

Recording copyright material without permission of the copyright owners is usually an infringement. If you wish to re-record copyright material, permission from the copyright owner is necessary. SANYO does not approve of, and cannot be held responsible for, any unlawful use of this machine.

When beat is heard

Beat (a high-pitched noise) may sometimes be heard during the recording of radio broadcasts. If this occurs, set the BEAT CANCEL switch (the back of the unit) to 1 or 2 position that reduces the level of the beat noise.

Recording from CD (Synchronous

recording)

1.Load a blank cassette.

2.Set the FUNCTION switch to CD.

3.Load a CD to be recorded.

-Select the track if required.

-For programmed recording, pro- gramme the material in advance.

4.Press the REC button. The PLAY button is engaged simultaneously and recording starts.

5.Press the STOP/EJECT button to stop recording at any time. When the end of the tape is reached, deck stop automatically and the playback of CD enters stop mode.

Recording from the radio or other sources

1.Load a blank cassette.

2.Tune in the radio station to be recorded or play other sources.

3.Press the REC button to start recording.

4.Press the STOP/EJECT button to stop recording.

Safeguards against accidental erasure

To protect side A, break out tab (1). To protect side B, break out tab (2).

-To erase or record a protected cassette, cover

the tab openings with adhesive tape (3). Note:

The REC button cannot be depressed when using a protected cassette.

- 7 -

540AU.indd 7

2009.4.8 10:11:22 AM