General Operation /Colour and Sound System
OFF TIMER
The OFF TIMER will switch off the TV automatical- ly after 30 minutes, 1 hour, 1 hour and 30 minutes, or 2 hours.
1 Press the TIMER button.
OFF 0:00
2 Press the VOLUME ( + or - ) button to select the time period.
■Just one minute before switching off the TV, “OFF 0:01” will be display on the screen.
■To cancel the OFF TIMER, select “OFF 0:00” by pressing the VOLUME (+ or - ) button.
■The OFF TIMER cancels when the TV set is turned off or if a power failure occurs.
ON TIMER
When the ON TIMER is set. TV will automatically be switched On to the selected programme posi- tion when the specified time has elapsed.
1 Press the TIMER button twice.
ON 0:00 | 2 | (ON TIMER setting | |
mode) | |||
|
|
Programme position for when TV is switched ON by ON TIMER.
2Press the VOLUME ( + or - ) button. The set time will be increased or decreased by 10 minutes each time the button is pressed ; the maximum time which can be set is 24 hours.
3 Use Direct Programme Selection to insert programme position for when TV is switched on by ON TIMER. (see page 7.)
■If no operation is performed after the TV has been switched on by the ON TIMER, such as if you are not at home, the TV will be auto- matically switched off after approximately
2 hours
■If the TV is already switched on when the time set for the ON TIMER has been reached, only the programme position will be changed to the set programme position.
■Cancelling ON TIMER. To cancel the ON TIMER, press the VOLUME ( + or - ) button to set it to “ON 0:00” while the ON TIMER screen is shown. Switching off the TV by pressing the Mains ON/OFF button will also cancel the ON TIMER settings.
Colour and Sound System
Setting of the Colour System | Setting of the Sound System |
Normally, set the colour system to “AUTO”, if the clear picture cannot be obtained even when the broadcasting or AV signal is received, press the RECALL/COLOUR SYSTEM button repeatedly until the optimum image can be produced.
(Refer to Broadcast Transmission System List indicated by the last of this page in a setup of Colour System.)
Each time the RECALL/COLOUR SYSTEM but- ton is pressed, colour system changes as follows;
6 | 6 | 6 |
AUTO | PAL | SECAM |
6 |
| 6 |
| NTSC4.43 |
| NTSC |
To set the sound system, make it during
When the sound is not clear or no sound is pro- duced on a programme number position, select sound system repeatedly until the optimum sound is obtained.
(Refer to Broadcast Transmission System List indicated by the last of this page in a setup of Sound System.)
To select sound system:
■Press the SOUND SYSTEM button to select the sound system directly. The sound system will be memorized automatically.
Note:Colour system is displayed according as Colour system option.
8
