Compliance

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele- vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Model Number(s)

: PDG-DXT10L

Trade Name

: Sanyo

Responsible party

: SANYO FISHER COMPANY

Address

: 21605 Plummer Street, Chatsworth, California 91311 U.S.A.

Telephone No.

: (818)998-7322

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

AC Power Cord for the United Kingdom:

This cord is already fitted with a modulized plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus. If the fuse cover is

detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same color as that visi- ble on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.

The Wires in this mains lead are colored in accordance with the following code: Green-and-yellow ············ Earth

Blue ································· Neutral Brown ······························ Live

As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings identifying the terminals in your plug proceed as follows:

The wire which is colored green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbolor colored green or green-and-yellow.

The wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black. The wire which is colored brown must be connected to the terminal which is marked with the letter L or colored red.

WARNING: THIS APPARATUS MUST BE EARTHED.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

iv

Page 6
Image 6
Sanyo PDG-DXT10L, PDG-DXT10KL manual Compliance, Federal Communications Commission Notice

PDG-DXT10KL, PDG-DXT10L specifications

The Sanyo PDG-DXT10L and PDG-DXT10KL are high-performance projectors that cater to the needs of both business professionals and educators. These models stand out due to their advanced features and robust technologies designed to deliver exceptional image quality and versatility in various environments.

At the heart of the PDG-DXT10L and PDG-DXT10KL projectors is their impressive brightness, rated at 3500 lumens. This high level of brightness ensures that presentations are clear and vivid, even in bright environments, making them ideal for conference rooms, classrooms, and auditoriums. The native resolution of 1280 x 800 pixels (WXGA) guarantees sharp and detailed images, rendering text and graphics with remarkable clarity.

One of the standout features of these projectors is the inclusion of advanced digital keystone correction technology. This allows users to easily adjust the image shape to ensure a perfect rectangular display, even when the projector is positioned at an angle to the screen. This feature enhances setup flexibility and reduces the time spent on adjustments, making it particularly useful in dynamic presentation settings.

Both models utilize Sanyo's proprietary technology for color reproduction, which enhances color accuracy and brightness. The projectors include a high-contrast ratio of 2500:1, facilitating deeper blacks and more vibrant colors, further improving the viewing experience. Additionally, the integration of a lens with a zoom capability allows for easy adjustments of the image size without moving the projector, providing convenience in varying space constraints.

Connectivity options are abundant in the PDG-DXT10L and PDG-DXT10KL. They come equipped with multiple input terminals, including HDMI, VGA, and even RS-232, allowing seamless integration with various multimedia devices. This wide range of connections ensures compatibility with laptops, Blu-ray players, and other high-definition equipment, making it a versatile tool for any presenter.

In terms of operational efficiency, these projectors are designed for sustainability. They feature a long lamp life of up to 5000 hours in eco mode, reducing the need for frequent replacements and lower overall maintenance costs. The projectors are also equipped with energy-saving features, contributing to lower power consumption.

In conclusion, the Sanyo PDG-DXT10L and PDG-DXT10KL projectors provide a blend of high performance, robust connectivity, and user-friendly features. They are perfect for professionals and educators seeking reliable and high-quality projection solutions for their presentations. The combination of brightness, image quality, and ease of use make these projectors a valuable addition to any multimedia setup.