Sanyo PLC-SL20 owner manual On-Screen Menu, Remote Control, Top Control

Basic Operation

On-Screen Menu

You can control and adjust this projector through the On-Screen Menu. Refer to the following pages to operate each adjustment on the On-Screen Menu.

1	Press the MENU button to display the On-Screen Menu
	(Menu bar). A red frame is a pointer.
2	Move the pointer (red frame) to the Menu icon that you want
	to select by pressing the Point Left/Right button.
3	Press the Point Down button and move the pointer (red
	frame or red arrow) to the item that you want to adjust, and
	then press the SELECT button to show the item data.
4	Adjust the item data by pressing the Point Left/Right button.
	Refer to the following pages for details of respective
	adjustments.
5	To close this menu, select Quit. To clear the On-Screen
	Menu, press the MENU button on the top control or on the

remote control.

Remote Control

POINT button

							SELECT button
							MENU button
	Top Control
	ON - OFF						POINT button
					POWER
							(outer ring)
INPUT
						WARNING
KEYSTONE		–		O		LAMP
	E			V
					L	REPLACE
	M	SELECT			U
	U				M
	L
	V				E
	O			+
							SELECT button
MENU
							MENU button
On-Screen Menu							Menu icon
			Menu bar				Pointer
							(red frame)

Pointer (red frame)

Press the Point Down but- ton to move the pointer.

Item

SELECT

button

Item data

Press the Point Left/Right but- tons to adjust value.

Quit item closes this menu.

22