ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by ADJUSTABLE FEET. Projection angle can be adjusted 0 to 6°.
1.Lift the front of the projector and press the feet lock buttons (left and right) under the sides of the projector.
When the buttons are pressed, feet lock is released.
2.Release the buttons at desired front height position. (feet is locked).
3.Turn the adjustable feet and adjust picture position and tilt.
FEET LOCK BUTTONS
DOWN
DOWN
UP
UP
ADJUSTABLE FEET
MOVING THE PROJECTOR
Use the carrying handle when moving the projector.
Replace the lens cover and retract the adjustable feet when moving the projector to prevent damage to the projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
¡Do not drop or give a shock to the projector, otherwise damage or malfunction may result. ¡When carrying the projector, use a Sanyo recommended Carrying Case.
¡Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, use a Sanyo recommended Case.
¡For a carrying or transportation cases, contact a Sanyo authorized dealer.
– 9 –