BEFORE OPERATION

Operating Range

Point the Remote Control toward projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for Remote Control is about 16.4’ (5m) and 60° in front and rear of the projector.

16.4’

(5 m)

60°

Used to operate P-TIMER function. (P21)

16.4’ (5 m)

REMOTE CONTROL BATTERIES INSTALLATION

1

Remove the battery

compartment lid.

Press lid downward and slide it.

2

Slide the batteries

3

Replace the compartment lid.

into compartment.

 

Two AA size batteries For correct polarity (+ and

–), be sure battery terminals are in contact with pins in compartment.

To insure safe operation, please observe the following precautions :

Use (2) AA, UM3 or R06 type alkaline batteries.

Replace two batteries at the same time.

Do not use a new battery with a used battery.

Avoid contact with water or liquid.

Do not expose the Remote Control to moisture, or heat.

Do not drop the Remote Control.

If a battery has leaked on Remote Control, carefully wipe case clean and install new batteries.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

15