COMPUTER INPUT (RGB Scart 21-Pin Video Input)

SELECTING INPUT SOURCE

DIRECT OPERATION

Choose either Computer 1 or Computer 2 by pressing the INPUT button on the Top Control or press the COMPUTER button on the Remote Control.

If the projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

NOTE

Computer 2 can be selected when the COMPUTER IN 2 / MONITOR OUT terminal is set as Computer 2 at the menu item "Terminal" in the SETTING Menu. (Refer to page 36.)

INPUT button

Computer 1

Computer 2

 

Video

COMPUTER button

Computer 1

 

Computer 2

 

 

Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is used as Monitor out.

MENU OPERATION

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT button to move the red

 

frame pointer to the INPUT Menu icon.

2

Press the POINT DOWN button to move the red arrow pointer to

 

either Computer 1 or Computer 2 (Only the Computer 1 is

 

displayed when the Monitor out is selected in the SETTING

 

Menu.), and then press the SELECT button. The Source Select

 

Menu will appear.

3

Move the

pointer to the correct input source and then press the

 

SELECT button.

 

When the input source is coming from a computer

RGB

 

 

through the COMPUTER IN 2 / MONITOR OUT

 

 

 

 

terminal, select RGB.

INPUT MENU

Computer

INPUT Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Source Select Menu

Move the pointer to RGB or RGB (Scart) and press the SELECT but- ton.

RGB (Scart)

RGB (Digital)

RGB (Analog)

When the input source is coming from a DVD player through the COMPUTER IN 2 / MONITOR OUT terminal, select RGB (Scart).

When digital signal is connected to DVI terminal, select Digital.

When analog signal is connected to DVI terminal, select Analog.

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Computer 1 and press the SELECT button.

Computer

Source Select Menu

Move the pointer to RGB (Digital) or RGB (Analog) and press the SELECT button.

Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is used as Monitor out.

22