Basic Operation
Turning Off the Projector
1 | Press the POWER |
|
|
|
|
|
|
|
| ||
| or on the remote control, and “Power off?” appears on |
|
|
|
|
| the screen. |
|
|
|
|
2 | Press the POWER |
|
|
|
|
|
|
|
| ||
|
|
|
| ||
| projector. The POWER indicator starts to blink red, and |
|
|
|
|
| the cooling fans keep running. (You can select the level |
|
|
|
|
| of the fans’ quietness and running speed. See page |
|
|
|
|
| “Power off” disappears after 4 seconds. | ||||
| 49.) At this time you can unplug the AC power cord | ||||
| even if the fans are still running. |
|
|
|
|
3 | When the projector has cooled down enough to be |
|
|
|
|
| turned on again, the POWER indicator stops blinking. |
|
|
|
|
TO MAINTAIN THE LAMP LIFE, ONCE YOU TURN
THE PROJECTOR ON, WAIT AT LEAST 5 MINUTES
BEFORE TURNING IT OFF.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET STAND
FOR ABOUT AN HOUR IN EVERY 24 HOURS.
✔Note:
•When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord to an AC outlet (p. 46).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING indicator blinks or emits a red light, see “Warning Indicator” on page 50.
•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal
19
