Sanyo PLC-XL45 owner manual Basic Operation How to Operate the On-ScreenMenu, Top Control

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1	Press the MENU button on the top control or on the
	remote control to display the On-Screen Menu.
2	Use the Point 7 8 buttons to select a Menu icon; use
	the Point ed buttons to select an item.
3	Press the SELECT button to show the item data. To
	adjust the data, use the Point 7 8 buttons. Refer to the

Top Control

	POWER	WARNING	LAMP REPLA
		I	KEYST
ON	MENU	NPUT
-			ONE
OF
F
	SELECT
			+

-VOLUME

VOLUME

MENU button

POINT button

relevant pages for more details about each adjustment.

SELECT button

To close the On-Screen Menu, press the MENU button again.

✔Note:

•The selected item is not active until the SELECT button is pressed.

Remote Control

SELECT button

On-Screen Menu

Menu bar

Pointer (red frame) Press the Point ed buttons to move the pointer.

Item

SELECT

button

MENU button POINT buttons

Menu icon

Pointer (red frame)

Item data

Press the Point 7 8 buttons to adjust the value.

Quit

Exit this menu.

20