Selecting Video System | Sanyo PLC-XT10A specification

VIDEO INPUT

SELECTING VIDEO SYSTEM

1	Press MENU button and ON-SCREEN MENU will appear. Press
1	POINT LEFT/RIGHT buttons to move a red frame pointer to AV
	SYSTEM Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to the
2	system that you want to select and then press SELECT button.

VIDEO JACK OR S-VIDEO JACK

Auto

Projector automatically detects incoming Video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press SELECT button.

Y, Pb/Cb, Pr/Cr JACKS

Auto

Projector automatically detects incoming Video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press SELECT button.

32

Image 32

Sanyo PLC-XT10A Selecting Video System, PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N, AV System Menu Video or S-VIDEO

Contents

Model PLC-XT10A PLC-XT15A To the Owner Safety Instructions Voor de klanten in Nederland Compliances Federal Communication Commission Notice Table of Contents Features and Design Compact Design HOT AIR Exhausted PreparationName of Each Part of Projector For Continental Europe For the U.K SETTING-UP ProjectorConnecting AC Power Cord Preparation Positioning Projector Room Light Preparation Adjustable Feet Moving Projector Connecting Projector USB Connector Series BTerminals of Projector Monitor Output Connecting to Computer Connecting ProjectorTerminals Projector Connecting to Video Equipment Audio Video Operation of Remote Control Inside the Battery Compartment BOXBefore Operation Laser Pointer Function Point Volume + Buttons Timer ButtonZoom Button Select Button TOP Controls and Indicators Lamp Replace Indicator Flow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Basic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF Projector Adjusting Screen Zoom AdjustmentFocus Adjustment Keystone Adjustment Sound Adjustment RGB Computer InputSelecting Input Source PC System Menu Selecting Computer SystemAuto XGA Computer Input Compatible Computer SpecificationsResolution PC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC Adj Computer Input Manual PC Adjustment Full screen Display areaDisplay area H Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4 Computer Input Image Level Adjustment Image Adjust Menu Picture Screen Adjustment Screen Menu Video Video InputVideo Component Video Signal Format Selecting Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEO Cinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Remote Control Unit To change the code of Projector Lamp Replace Lamp ReplacementAppendix Lamp Handling Precautions Appendix Lamp Replace Counter Operating Wireless Mouse Operating Wireless MouseInstallation Maintenance AIR Filter Care and CleaningCleaning Projection Lens Recommendation Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does not Technical Specifications Appendix Configurations of Terminals Control Port ConnectorUSB Connector Series B Computer INPUT-1 and Monitor OUT Terminals Analog Optional Parts Page Part No 305 8269 1AA6P1P3934-- MC3AB