Computer Input
Input Source Selection
Direct Operation | Top Control |
|
Choose either Computer 1 or Computer 2 by pressing | INPUT button |
|
INPUT button |
| |
the INPUT button on the top control or press the |
| |
COMPUTER button on the remote control. Before | Computer 1 |
|
using these buttons, correct input source should be |
|
|
selected through Menu operation as described below. | Computer 2 | ✳ |
| ||
| Video |
|
| Remote Control |
|
| COMPUTER button | |
| COMPUTER button | |
| Computer 1 |
|
| Computer 2 | ✳ |
| ✳ See Note at the bottom of this page. |
|
Menu Operation
1 | Press the MENU button to display the |
| Menu. Press the Point 7 8 buttons to move the |
| red framed pointer to the Input Menu icon. |
2 | Press the Point ed buttons to move the red |
| arrow pointer to either Computer 1 or Computer |
| 2, and then press the SELECT button. |
3 | After the Source Select Menu appeared for |
| Computer 1, move the pointer to RGB and then |
| press the SELECT button. |
Input Menu
Computer
1
Input Menu
Input Menu icon
Move the pointer (red arrow) to Computer 1 and press the SELECT button.
Source Select Menu
Move the pointer to RGB and press the SELECT button.
Input Computer
✔ Note: | Input Search function is set On1 |
• When the | |
or On2, the | input signal will be searched |
automatically (p.45) | |
• C o m p u t e r 2 i s n o t d i s p l a y e d w h e n t h e COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out. (p.46)
•Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal.
Move the pointer (red arrow) to Computer 2 and press the SELECT button.
25