Sanyo PLC-XU78, PLC-XU75 owner manual Appendix

Appendix

Some displays are not seen during operations

– Check the Display item. (See page 43.)

PIN code dialog box appears at	– PIN code lock is being set. Input a PIN code (1234 or numbers
the start-up	you have set). (See pages 18, 49 and 50.)
Computer 2 cannot be selected	– Select Computer 2 at the Terminal function. (See page 47.)
The Terminal function cannot be	– The Terminal function cannot be selected after Computer
selected	2 is selected. Select other input source such as Computer
	1 or Video with the INPUT button on the top control, the
	COMPUTER button or the VIDEO button on the remote
	control so that the Terminal function can be selected.
The Remote Control does not	– Check the batteries.
work	– Make sure there is no obstruction between the projector and
	remote control.
	– Make sure you are not too far from the projector when using
	the remote control. Maximum operating range is 16.4' (5 m).
	– Make sure the code of the remote control is conformed to that
	of the projector. (See page 48.)
	– Unlock the Key lock function for the remote control. (See page
	49.)
The Top Control does not work	– Unlock the Key lock function for the top control of the projector.
	(See page 49)

WARNING:

High voltages are used to operate this projector.. Do not attempt to open the cabinet..

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the problem. We will advise you how to obtain service.

The CE Mark is a Directive conformity mark of the European Community (EC).

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

Pixelworks ICs used.

58