PREPARATION

POSITIONING PROJECTOR

This projector is designed to project on a flat projection surface.

Projector can be focused from 5.0’ (1.5m) ~ 52.2’ (15.9m).

Refer to figure below to adjust screen size.

ROOM LIGHT

Brightness in room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide best image.

52.2’(15.9m)

 

 

 

 

38.4’(11.7m)

 

 

 

 

400”

 

 

 

 

 

 

Max. Zoom

 

 

 

25.6’(7.8m)

 

 

 

 

 

 

 

 

300”

 

 

 

 

 

12.7’(3.9m)

 

 

 

 

308”

 

 

 

 

 

 

200”

 

 

 

5.0’(1.5m)

 

 

 

 

 

231”

Min. Zoom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100”154”

40”

30”

77”

NOTE: The figures below are only for Model PLV-75/PLV-80.

Projection lens is not provided with Model PLV-75L/PLV-80L.

Screen

 

Max. Zoom

 

40”

 

 

100”

 

 

150”

 

 

200”

 

 

250”

 

 

300”

 

 

400”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Size

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Min. Zoom

 

30”

 

 

77”

 

 

115”

 

 

154”

 

 

192”

 

 

231”

 

 

308”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Distance

 

5.0’ (1.5m)

 

 

12.7’ (3.9m)

 

 

19.1’ (5.8m)

 

 

25.6’ (7.8m)

 

 

32.0’ (9.8m)

 

 

38.4’ (11.7m)

 

 

52.2’ (15.9m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LENS SHIFT ADJUSTMENT

Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to provide projected image where you want. Refer to P 22 for operation.

Highest Lens Shift

Lowest Lens Shift

H1

H3

 

H2

H4

H1 : H2 = 6 : 1

H3 : H4 = 1 : 1

 

NOTE

Screen size and lens shift ratio on the above charts are standard values and they may change by positioning conditions.

LENS INSTALLATION (For Lensless model PLV-75L/PLV-80L only)

Before setting up a projector, install Projection Lens on

Projector.

1.

Before installation, check where a projector is used and

COVER CAP

 

 

prepare suitable lens. For specifications of a Projection Lens,

 

 

contact sales dealer where you purchased a projector.

 

2.

For installation, refer to installation manual in the optional

 

 

lens.

 

NOTE;

When install the lens, remove the cover cap in the projector.

9