Manuals / Brands / Computer Equipment / Network Card / Sanyo / Computer Equipment / Network Card

Sanyo POA-MD13NET2 When the internal power circuit is failed:, When the life span of lamp is reached:, When the lamp use time reaches preselect lamp use time:

1 176

Download 176 pages, 6.02 Mb

32

Chapter 3 Basic Setting and Operation

●When the internal power circuit is failed:●When the life span of lamp is reached:

✐Replace it with a new lamp immediately and reset the lamp counter. If the projector

is used without reset the lamp counter, the alert mail is sent to users in every power-

on of the projector. This alert mail will not be sent when unchecking the mail sending

condition "When the life span of lamp is reached".

TITLE: Message from projector

07-10-2003 00:59

Projector Model Name: PLV-HD10

TCP/IP: 192.168.1.201 Projector Name: myProjector

It sends you following message.

*The Projector lamp was turned off, because projector power circuit failed.

Unplug the projector from AC outlet and ask servicing to qualified service

personnel.

Information: FFFEFFFF

TITLE: Message from projector

07-10-2003 00:59

Projector Model Name: PLV-HD10

TCP/IP: 192.168.1.201 Projector Name: myProjector

It sends you following message.

*The life span of lamp is reached.

✐The Projector lamp was turned off, because the projector power circuit failed.

Unplug the projector from AC outlet and ask servicing to a qualified service personnel

with the information code “FFFEFFFF”.

●When the lamp use time reaches preselect lamp use time:

✐The Network Board sends a free message when the lamp use time reaches the pre-

selected lamp use time. It can be used for preparation of the lamp replacement and

the maintenance required.

TITLE: Message from projector

07-10-2003 00:59

Projector Model Name: PLV-HD10

TCP/IP: 192.168.1.201 Projector Name: myProjector

It sends you following message.

*The lamp use time reaches 800 hours. Prepare the lamp replacement.

Free messages

Contents

Main Network Board For HD Series POA-MD13NET2 This side is for HD series OWNERS MANUAL INSTALLATION and OPERATION of the Network Board Federal Communication Commission Notice Compliance CAUTION ON USE IN NETWORK CAUTION Contents Chapter 1Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Chapter 3 Basic Setting and Operation . . . . . . . . . . . . . . . . . .21 Chapter 4 Controlling the Projector . . . . . . . . . . . . . . . . . . . . .33 Chapter 5 Controlling the Multi-Projectors . . . . . . . . . . . . . .55 Chapter 6 Use of Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Chapter 7 Appendix:A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Appendix:B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Page Features Web Management function E-Mail Alert function Multi-control function Automatic On/Off using Clock function Internet Intranet Operating Environment The limitation*1 of connection between this product and Hub or Computer Suitable LAN cables are limited by length and type as follows; Trademarks Notice Expression/Abbreviation Use of this manual Page Function of the Network Board Installation and network configuration Flow of installation zName and function of each part xInstallation and Network configuration Mounting 2 3 4 2 3 4 Network configuration Confirmation of the network menu Configure the network 1 2 How to enter the numbers 3 Completing of installation Page How to enter the numbers with the screen 10-key pallet 1. 2. 3. 4. 5. 6. Notice about system construction Page 2 Login the setting page of the projector 1 3 z x Initial Settings 1 2 3 4 Network Configuration 1 2 E-mail Setting 1 3 2 4 alert message Examples: Type and contents of alert mail When the internal temperature is too high: When the internal power circuit is failed: When the life span of lamp is reached: When the lamp use time reaches preselect lamp use time: Page Power on/off the projector Check the status of projector x Control the projector Input How to adjust and select the item Item selection Setting value change System Available selection when the Computer[Analog] input Available selection when the VIDEO/S-VIDEO input Available selection when the Y, Cb/Pb, Cr/Pr input Indication and selection of the custom mode and Total Save mode Display Save a Set 1 2 3 Image Save an image adjustment value 1 2 3 Load an image mode Sound Chapter 4 Controlling the Projector Setting About Lamp Counter Reset How to set the Timer 1 v 2 3 4 Check the Timer events Getting the current time Cancel the timer Page Total Save 1 2 3 4 Check the Save items Load a control set Control the projector's menu Make a memo Page Multi-Control Note: Check IP address and projector Register IP address and projector Status Exclude/Add/Delete a projector Load and apply the setting value Control Control multi-projectors at the same time Page Serial Port setting Setting for controlling the equipment connected to the serial port from the computer Setting for controlling the projector from the serial controller connect- ed to the serial pot controller Setting for controlling the projector from the computer through the LAN port Chapter 6 Use of Serial Port Control Examples Example 1 Controlling AV equipment through the network. Internet Intranet Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). Serial Port Switching Use of Telnet 3 4 Control the projector with Telnet Page Chapter 7 Appendix Examples of Connection Peer-To-Peer connection Connecting the projector (PJ01) to the control computer (PC05) directly Computer Name: PC10 * UTP cross cable The gateway (Router) installed in the network To another network Office Network Group: 192.168.10.0 Connecting the projector (PJ01) to the control computer (PC05) via the gateway. Web browser setting Active Script/JavaScript enable Proxy setting Examples: OS/Browsers Windows XPProfessional Page Page Page Product specification The CE Mark is a Directive conformity mark of the European Community (EC). LAN port specification Port Specification Serial port specification 8-pin modular connector (RJ-45) D sub 9-pin connector (RS-232C) Page Q&A Installation/Access Why doesnt the setting page appear in my web browser? How can I restrict access from the computer. Can I access the projector installed on the companys local area net- work from a remote location? Page Page Page Page Page Page Page Network Board POA-MD13NET2 OWNERS MANUAL INSTALLATION and OPERATION of the Network Board Compliance Federal Communication Commission Notice Warning CAUTION ON USE IN NETWORK CAUTION Contents Chapter 1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Chapter 3 Basic Setting and Operation . . . . . . . . . . . . . . . . . .21 Chapter 4 Controlling the Projector . . . . . . . . . . . . . . . . . . . . .31 Chapter 5 Controlling the Multi-Projectors . . . . . . . . . . . . . .51 Chapter 6 Use of Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Chapter 7 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Appendix:B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Page Features Web Management function E-Mail Alert function Multi-control function Automatic On/Off using Timer function Internet Intranet Operating Environment The limitation*1of connection between this product and Hub or Computer Suitable LAN cables are limited by length and type as follows; Notices Expression/Abbreviation Use of this manual Trademark Page Function of the Network Board Installation and network configuration Flow of installation zName and function of each part 14 2 3 4 xInstallation and Network configuration Mounting 15 Connection of LAN cable 2 3 4 16 Network configuration Confirmation of the network menu Configure the network 1 17 2 How to enter the numbers 3 Completing of installation Page Notice about system construction Page Page 22 2 Login the setting page of the projector 1 23 3 z 24 x 25 Initial Settings 1 26 2 3 27 Network Configuration 1 2 28 E-mail Setting 1 2 addresses 29 3 Examples: Type and contents of alert mail When the life span of lamp is reached: When the internal temperature is too high: When the internal power circuit is failed: Page Power on/off the projector Check the status of projector Check the status of projector Input Control the projector PC Adjustment These parameters will appear only when the analog computer input mode is selected. Load a Set 36 Save a Set 1 2 3 System Adjustment Available selection when the VIDEO/S-VIDEO input Available selection when the Y, Cb/Pb, Cr/Pr input Chapter 4 Controlling the Projector Image Adjustment 39 Save a image adjustment value 1 2 3 Sound Adjustment Screen Adjustment Setting * The displayed items may differ from the actual depending on the functions of projector you use. About Lamp Counter reset 43 How to set the Timer 1 2 3 Getting the current time Notes on timer setting Cancel the timer Service To restore the setting, press the Default but- ton. 46 Save Actual Adjustment 1 2 3 Check the Save items Load a control set Control the projector's menu Make a memo Page Multi-Control Note: Register IP address and projector Check IP address and projector Exclude/Add/Delete a projector Status Load and apply the setting value Control Page Page Serial Port setting Setting to control the equipment connected to the serial port from the computer Setting to control the projector from the serial controller connected to the serial pot serial controller Setting to control the projector from the computer through the LAN port Chapter 6 Use of Serial Port Control Examples Controlling AV equipment through network Example 1 Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). Serial Port Switching Use of Telnet 63 3 4 5 Control the projector with Telnet Page Chapter 7 Appendix Examples of Connection Peer-To-Peer connection Connect the projector (PJ01) to the control computer (PC05) directly Computer Name: PC10 * UTP cross cable The gateway (Router) installed in the network To another network Office Network Group: 192.168.10.0 Connect the projector (PJ01) to the control computer (PC05) via the gateway. Web browser setting Active Script/JavaScript enable Proxy setting Setting examples: OS/Browsers Windows 95/98 Page Page Page Mac OS 8.6 Page Page Page Product specification LAN port specification Port Specification Serial port specification 8-pin modular connector (RJ-45) D sub 9-pin connector (RS-232C) Page Q&A Installation/Access Why doesnt the setting page appear in my web browser? How can I restrict access from the computer. Can I access the projector installed on the companys local area net- work from a remote location?