Remote Control Unit (continued)

O: SENSOR button

Use this button to switch to the temperature sensor of the remote

 

controller.

 

The temperature sensor of the air-conditioner is selected at the factory

and the display indicates under this selection.

 

NOTENO

If the remote controller is located near a heat source, such as a space

 

 

heater or in direct sunlight, press the SENSOR button to switch to the

 

 

 

 

sensor on the indoor unit.

 

 

 

P: ACL button

Puts the wireless remote controller into pre-operation status. Always

(ALL CLEAR)

press this button after replacing the batteries.

 

 

 

Q: DISPLAY

Information on the operating conditions is displayed while the wireless

 

 

remote controller is switched on. If the unit is turned off, only the mode

 

 

that was set previously is still displayed.

NOTENOTE • The wireless remote controller sends the temperature signal to the air conditioner regularly at three minute intervals. If the signal from the wireless remote controller stops for more than ten minutes due to the loss of the wireless remote controller or other trouble, the air conditioner will switch to the temperature sensor which is built into the indoor unit and control the room temperature. In these cases, the temperature around the wireless remote controller may differ from the temperature detected at the air conditioner’s position.

DIP switch settings when the wireless remote controller will be used for cooling only

•If the wireless remote controller will be used for cooling only, refer to the figure below and move the switch to position C.

Check that sliding switch 1 is set to “S.”

SKN

S:Flap type with limit switch

(4-way, ceiling-mounted, wall-mounted)

K:Swing-only type (floor-mounted) installed

N:No-flap type (built-in)

Set sliding switch 2 to match the unit type.

AHC AHC

A:Heat-pump type (H: Heat pump with

no auto heat/cool) C: Cool-only type

Sliding switch 1

ACL (ALL CLEAR) button

Sensor button

2

Sliding switch 2

2 - 11

Page 28 Page 30
Page 29
Image 29
Sanyo RCS-BH80UA.WL, RCS-SH80UA.WL, RCS-SH1UA instruction manual ALL Clear
Page 28 Page 30

RCS-BH80UA.WL, RCS-SH80UA.WL, RCS-SH1UA specifications

Sanyo, a renowned brand known for its innovative heating and cooling solutions, offers a robust lineup of air conditioning systems, notably the models RCS-SH1UA, RCS-SH80UA.WL, and RCS-BH80UA.WL. These models are designed to provide efficient climate control solutions for both residential and commercial applications, emphasizing energy efficiency, comfort, and advanced technology.

The Sanyo RCS-SH1UA is a standout unit equipped with powerful heating and cooling capabilities ideal for varied environments. This compact split system offers a sleek design, making it suitable for small spaces while delivering substantial HVAC performance. One of its significant features is the advanced inverter technology, which adjusts the power consumption based on the current heating or cooling demand, ensuring consistent comfort and energy savings.

On the other hand, the RCS-SH80UA.WL and RCS-BH80UA.WL models are equipped with advanced features to enhance user experience. Both units boast high energy efficiency ratings, which are crucial for reducing electricity bills while minimizing environmental impact. These models incorporate innovative airflow systems that ensure uniform air distribution, creating a pleasant indoor environment regardless of outside conditions.

Both RCS-SH80UA.WL and RCS-BH80UA.WL are designed with user-friendly controls. The inclusion of remote control options allows for convenient adjustments without needing to be near the unit. Additionally, the air conditioning units come with programmable timers and multiple fan speeds, enabling users to fine-tune their climate control experience.

Another noteworthy characteristic across these Sanyo models is their whisper-quiet operation. Designed to minimize noise, they provide a tranquil atmosphere, making them suitable for bedrooms, offices, and other quiet spaces. Furthermore, the air-purifying technologies integrated into these units enhance indoor air quality by reducing pollutants and allergens, promoting a healthier living environment.

In conclusion, the Sanyo RCS-SH1UA, RCS-SH80UA.WL, and RCS-BH80UA.WL air conditioning systems symbolize a blend of efficiency, technology, and user-centric design. With their advanced features and energy-saving capabilities, these models are perfect choices for those aiming to achieve superior climate comfort while being environmentally conscious. Whether you need a system for a small space or a larger area, Sanyo offers reliable solutions that cater to diverse cooling and heating needs.
Top Page Image Contents