Sanyo SC-X90 instruction manual Cleaning The Secondary Filters, Cleaning The Air Outlet Filter

Gently clean the sub-filter with water.

CLEANING THE SECONDARY FILTERS

Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect

the power cord from the wall outlet before cleaning the filters.

CLEANING THE AIR OUTLET FILTER

The secondary filters consist of a general filter and a sub-filter.

Only use genuine Sanyo replacement filters.

1 Remove the filter cover.

2 Remove the air outlet filter from the filter cover.

3 Gently clean the air outlet filter with water.

Make sure that it is completely dry and then

4 re-install it into the filter cover.

5 Replace the filter cover.

Filter Cover

1

1

2

Air Outlet Filter

CLEANING THE SUB-FILTER

Clean the sub-filter when it becomes dirty.

Remove the dust compartment

1 (refer to page 8).

Remove the air inlet cover.

Remove the sub-filter from the vacuum

2 cleaner.

3

Make sure that it is completely dry and

4 then re-install it into the vacuum cleaner. Replace the air inlet cover and the dust compartment.

2	Sub-Filter
Air inlet
1 Cover

Caution: Do not wash the air outlet filter and sub-filter in a washing machine, and do not use any other equipment such as a hair dryer to dry it. Do not operate the vacuum without the sub-filter. Be sure the filter is dry and properly installed. Failure to do so could result in electrical shock, personal injury, or motor failure.

10