|
|
|
|
TROUBLESHOOTING |
| ||
If there is a problem with the vacuum cleaner, carry out the following checks | |||
to find the cause. If the problem still persists after the checks have been made, | |||
do not use the vacuum cleaner to prevent the possibility of an accident occurring. | |||
Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the | |||
wall outlet, and contact the place of purchase or your nearest Sanyo Service | |||
Center. |
|
| |
|
|
|
|
Problem |
| Cause | Remedy |
The motor does not operate |
| The power cord plug is not | Insert the power cord plug |
when the ON/OFF switch is |
| securely inserted into the | securely into the wall |
set to the "ON" position. |
| wall outlet. | |
| outlet.(refer to page 5 ) | ||
|
|
| |
Suction force is weak. |
| The dust compartment is full. | Empty the dust compartment. |
|
| The suction hose is blocked. | (refer to page 9) |
|
| Remove the blockage. | |
|
| The nozzle head is blocked. | (refer to page 11) |
|
| The filters (main filter, pre- | Remove the blockage |
|
| (refer to page 11) | |
|
| filter and the secondary | |
|
| Clean the filters. | |
|
| filters) are dirty. | (refer to page 10) |
|
|
|
|
The noise is loud. |
| The agitator is dirty. | Clean the agitator. |
|
|
| (refer to page 11 ) |
The agitator does not |
| The flat belt is worn or | Replace the flat belt. |
operate. |
| broken. | (refer to page 12 ) |
|
| The agitator is worn or | Replace the agitator. |
|
| broken. | (refer to page 13 ) |
|
|
| |
|
| ||
REPLACEMENT PARTS |
| ||
|
| ||
Be sure to use only Sanyo specified parts. |
| ||
Replacement parts can be obtained from your nearest Sanyo dealer | |||
or from nearest sanyo service center. |
| ||
If you want to replace any parts, do please contact the place of purchase | |||
or your nearest sanyo service center. |
| ||
Part Name & lllustration |
|
|
Flat Belt
6630054550
Agitator Assembly
This replacement can be obtained from nearest sanyo service center.
E
SANYO Electric Co., Ltd.
OSAKA, JAPAN
15