Manuals / Onkyo / Home Audio / Speaker System

Onkyo HT-S590 instruction manual Troubleshooting

Models: HT-S590

1 67
Download 67 pages 44.82 Kb
Page 55
Image 55

Troubleshooting

If you have any trouble using the AV receiver, look for a solution in this section.

If you can’t resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer.

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VIDEO 1] button, press the [STANDBY/ON] button. “Clear” will appear on the display and the AV receiver will enter Standby mode.

VIDEO 1/VCR

STANDBY/ON

Note that resetting the AV receiver will delete your radio presets and custom settings.

Power

Can’t turn on the AV receiver?

•Make sure that the power cord is properly plugged into the wall outlet.

•Unplug the power cord from the wall outlet, wait five seconds or more, then plug it in again.

The AV receiver turns off as soon as it’s turned on?

•The amp protection circuit has been activated. Remove the power cord from the wall outlet immedi- ately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord discon- nected for one hour. After that, reconnect the power cord, and then set the volume to maximum. If the AV receiver stays on, set the volume to minimum, discon- nect the power cord, and reconnect your speakers and input sources properly. If the AV receiver turns off when you set the volume to maximum, disconnect the power cord, and contact your Onkyo dealer.

Audio

There’s no sound or it’s very quiet?

•Press the SPEAKERS [A] or [B] button to turn on the indicator for the speakers that you want to output sound.

•Make sure that the digital input source is selected properly (page 35). Press the [DIGITAL INPUT] but- ton repeatedly.

•Make sure that all audio connecting plugs are pushed in all the way (page 24).

•Make sure that the polarity of the speaker cables is correct, and that the bare wires are in contact with metal part of each speaker terminal (page 20)

•Make sure that the speaker cables are not shorting.

•Check the volume. The AV receiver is designed for home theater enjoyment and has a wide volume range for precise adjustment (page 36).

•If the MUTING indicator is shown on the display, press the remote controller’s [MUTING] button to unmute the AV receiver (page 43).

•While a pair of headphones is connected to the PHONES jack, no sound is output by the speakers (page 42).

•Check the digital audio output setting on the con- nected device. On some games consoles, such as those that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an audio format from a menu.

•If your turntable doesn’t have a phono preamp built-in, you must connect one between it and the AV receiver. If your turntable uses an MC cartridge, you must con- nect an MC head amp, or an MC transformer and a phono preamp.

•Specify the speaker distances and adjust the individual speaker levels (pages 50, 51).

•The input signal format is set to PCM or DTS. Set it to Auto (page 54).

Only the front speakers produce sound?

•When the Stereo or Mono listening mode is selected, only the front speakers and subwoofer produce sound.

•Make sure the speakers are configured correctly (page 52).

Only the center speaker produces sound?

•If you use the Pro Logic II Movie or Pro Logic II Music listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker.

•Make sure the speakers are configured correctly (page 52).

The surround speakers produce no sound?

•When the Stereo or Mono listening mode is selected, the surround speakers produce no sound (page 46).

•Depending on the source and current listening mode, not much sound may be produced by the surround speakers. Try selecting another listening mode.

•Make sure the speakers are configured correctly (page 52).

The center speaker produces no sound?

•When the Stereo or Mono listening mode is selected, the center speaker produces no sound (page 46).

•Make sure the speakers are configured correctly (page 52).

The subwoofer produces no sound?

•The subwoofer outputs no sound while only speaker set B is on. Turn on speaker set A.

•When you play source material that contains no infor- mation in the LFE channel, the subwoofer produces no sound.

•Make sure the speakers are configured correctly (page 52).

•If the multichannel DVD input is selected and speaker set B is on, speaker set A is reduced to 2-channel play- back, so the subwoofer outputs no sound.

55

Page 54 Page 56
Page 55
Image 55
Onkyo HT-S590 instruction manual Troubleshooting
Page 54 Page 56

HT-S590 specifications

The Onkyo HT-S590 is a comprehensive home theater system designed to deliver outstanding audio performance and enhance the overall viewing experience. With its sleek design and advanced technologies, the HT-S590 stands out as an impressive option for both casual listeners and home cinema enthusiasts.

At the heart of the Onkyo HT-S590 is a powerful 5.1 channel AV receiver that supports a variety of audio formats, including Dolby TrueHD and DTS-HD Master Audio. This allows for the reproduction of high-definition sound that is crisp and rich, giving users the feeling of being part of the action. The system is equipped with a robust 80 watts per channel amplification, ensuring ample power for most home theater setups.

One of the standout features of the HT-S590 is its compatibility with 4K Ultra HD video resolution. This capability ensures that it can seamlessly pass through 4K video signals from compatible sources to your television, providing stunning picture quality coupled with the exceptional sound experience. Additionally, it supports HDR (High Dynamic Range) content, offering improved contrast and vivid colors.

The system also includes integrated Bluetooth connectivity, making it easy to stream music wirelessly from smartphones, tablets, or computers. This feature enhances user convenience, allowing users to enjoy their favorite playlists without the hassle of wired connections.

In terms of speaker configuration, the HT-S590 comes with a set of five satellite speakers and a powerful subwoofer. The compact satellite speakers can be easily mounted on walls or placed on shelves, providing versatility in speaker placement, while the subwoofer delivers deep bass that adds depth to movies, music, and gaming.

The Onkyo HT-S590 is user-friendly, featuring an on-screen display and a remote control that simplifies navigation through its various settings. It also has several HDMI inputs for connecting multiple devices, such as game consoles, Blu-ray players, and streaming devices, streamlining the entertainment hub of your home.

Overall, the Onkyo HT-S590 is an impressive home theater system that combines advanced audio technologies, user-friendly features, and a sleek design, making it an excellent choice for anyone seeking to elevate their home entertainment experience. Its blend of performance and versatility ensures that it can adapt to a variety of viewing and listening preferences, providing unmatched quality for movies, music, and more.