Setting Up Screen Call
This feature enables you to answer incoming calls by using pre-
recorded announcements,either one that is pre-recorded or one
that you record.You can also record the caller’s message into the
Voice Memo list.To listen to the message,see “Reviewing Voice
Memos ”on page 91.
ActivatingScreen Call
To start Screen Call when you have incoming calls:
1. Press to display the options.
2. Highlight Screen Calland press .
To set Auto Screen Call:
1. Press to access the main menu.
2. Highlight Voice Servicesand press .
3. Highlight Screen Calland press .
4. Highlight Autoand press .
5. Highlight Onand press .
If you want to change the answer time,enter your desired
number (from 1 to 16 seconds)by using numeric keys or the
navigation key up or down.
6. Press or (left softkey).The icon is displayed on the
Standby display.
Tip:If a new caller’s message is waiting, appears on the display. The
memos recorded while activating “Screen Call” are shown with “√” or
“!” icon in the list. (“√”: once played, “!”: not played yet)
Tip:While the caller is recording: Pressing stops recording and
disconnects the call. Pressing answers the call.
OK
93
Erasing Voice Memos
To erase all voice memos:
1. Follow steps 1-4 on the previous page.
2. Press (right softkey).
3. Highlight Erase Alland press .
4. Highlight Yesand press .
– or –
1. Press to access the main menu.
2. Highlight Voice Servicesand press .
3. Highlight Voice Memoand press .
4. Highlight Erase Alland press .
5. Highlight Yesand press .
To erase individual memo:
1. Press to access the main menu.
2. Highlight Voice Servicesand press .
3. Highlight Voice Memoand press .
4. Highlight Playor Play:Speakerand press .
5. Display the memo list,highlight the memo you want to erase,
and press (right softkey).
6. Highlight Eraseand press .
7. Highlight Yesand press .
Options
Options
92