●Cylindrical-type Primary Lithium Batteries

WARNING! "DO NOT CHARGE"

1. Do not use batteries for unspecified purposes.

Differences in voltage or terminal configuration may cause an imperfect connection, fire, heat generation, leakage or bursting.

2. Do not charge.

When this battery is charged, gas is generated inside and raises internal pressure, resulting in fire, heat generation, leakage or bursting.

10. Do not apply strong pressure nor handle roughly.

Doing so may cause fire, heat generation, leakage or bursting.

11. To prevent damage to the safety vent inside the battery, do not deform in any way.

12. Do not force-discharge.

When a battery is force-discharged by an external power source, the voltage drops to 0 or less (reversal voltage) and gas is generated inside the battery. This may cause fire, heat generation, leakage or bursting.

3. Do not heat, disassemble nor dispose of in fire.

Doing so damages the insulation materials or the safety vent, resulting in fire, heat generation, leakage or bursting.

4. Do not insert batteries with the + and -- polarities reversed.

Make sure the polarities are in the right position when inserting the batteries into equipment. When using 3 or more batteries, the equipment may operate even though one of the batteries is improperly inserted. But this may cause leakage or bursting.

5. Do not short-circuit.

If the + and --- come into contact with metal objects, short circuiting occurs resulting in heat generation or bursting. When carrying or storing batteries, avoid direct contact with metal objects such as bracelets or key chains by putting them in a separate bag.

6. Keep batteries out of children's reach.

If leaked liquid is ingested or a battery is swallowed, consult a physician immediately.

7.In case of leakage or a strange smell, keep away from fire to prevent ignition of any leaked electrolyte.

8.Do not use new and used batteries together. Do not use different types of

batteries together.

Doing so may cause fire, heat generation, leakage or bursting.

9. Do not solder directly.

Doing so may cause damage to insulation materials. It may also cause fire, heat generation, leakage or bursting.

13. Do not damage nor peel off the resin film on the surface of the battery.

CAUTION!

1.If leaked liquid gets in the eyes, wash them with clean water and consult a physician immediately.

2.Do not use nor leave the batteries in direct sunlight nor in high-temperature

areas.

Doing so may cause heat generation, leakage or bursting.

3.Avoid contact with water.

This can cause heat generation.

4.Read the equipment instruction manual and precautions carefully before use. Some usages or types of equipment do not suit the specifications or performance of these batteries.

5.Keep batteries away from direct sunlight, high temperature and humidity.

Leaving batteries in such places may cause heat generation.

6.Be sure to wrap each battery when disposing or storing to avoid short sircuit.

Putting batteries together or in contact with metal objects causes short circuiting, resulting in fire, heat generation or bursting.

7.For disposal, follow local government regulations.

〔Precautions for Designing Equipment〕

For further information, refer to the Connection Terminal Specifications for Lithium Batteries and Key Circuit Design Points which is available upon request.

2