Sanyo SRR-23FD-MED p r e s e r v a t i o n, MPR-513, MPR-1013R, Storage, Uniformity, Compressor

innovation performance reliability support

p r e s e r v a t i o n

STORAGE UNIFORMITY DEFROST SYSTEM

Uniform storage is unaffected by ambient temperature.

An electronic sensor accurately monitors chamber temperature and feeds the infor- mation to the microprocessor for precise control at preset temperature. Fans ensure gentle air circulation to provide uniform top to bottom temperature control after frequent door openings. SANYO's easily calibrated, reliable and stable controls make validation easier.

COMPRESSOR

Remarkable cooling efficiency.

A highly efficient hermetic compressor, specially designed and developed by SANYO, is utilized to provide power- ful and rapid cooling to maintain proper temperature level.

Plenums Direct Airflow

SANYO's plenum design features uniform cold air flow distribution throughout the chamber to ensure temperature unifor- mity—essential for validated storage requirements.

SANYO's Cyle Defrost System

Defrosting is performed automatically during compressor "off" cycles, and by sensing frost levels. This way defrosting is performed only when required, further protecting the contents against unneces- sary temperature rise. The defrosting heater also acts as an emergency heat source to prevent samples from freezing in extremely low ambient temperature

conditions.

MPR-513	MPR-1013R
	Equipped with sliding shelves (right side)
Effective capacity: 17.2 cu. ft.	Effective capacity: 36.5 cu. ft. (1,034 liters)

Cooling Performance: 2ºC to 14ºC	Cooling Performance: 2ºC to 14ºC
(Ambient temp. -5ºC to 35ºC)	(Ambient temp. -5ºC to 35ºC)