Sanyo C4272R S/C, CH4272R H/P, UHW2672R, UHW3672R 6. HOW TO INSTALL THE WIRED REMOTE CONTROLLER (OPTIONAL PART)

60
RC
(WD)
6-1. Installation Site Selection
Install the remote controller at a height of between
3–5 ft. above the floor.
Do not install the remote controller in a place where
it will be exposed to direct sunlight or near a
window or other place where it will be exposed to
the outside air.
Be sure to install the remote controller vertically,
such as on a wall.
The mounting position for the remote controller
should be located in an accessible place for control.
Never cover the remote controller or recess it into
the wall.
Drainage Work
When mounting the remote controller on a wall,
refer to Figs. 6-1 and 6-2.
6. HOW TO INSTALL THE WIRED REMOTE CONTROLLER
(OPTIONAL PART)
Fig. 6-1
3-21/32 in. or more
Spacer
Wall
Hole for routing
remote control
cable
3-17/32 in. or more 4-29/32 in. or more
4-29/32 in. or more
(from wall) (when continuous
installation)
(from wall) (when continuous
installation)
JIS C8340
1 switchbox
(no cover)
Fig. 6-2
Spacer
Wall
Hole for routing
remote control
cable
3-17/32 in. or more 4-29/32 in. or more
(from wall) (when continuous
installation)
JIS CB8340
2 switchboxes
(no cover)
07-115 SSHP_II 5/7/07 4:00 PM Page 60