SETTINGS
Camera setup section
INT |
|
|
| LL |
|
|
| ||
EI |
|
|
| AI |
|
|
| ||
BLC |
|
|
| OFF |
|
|
| ||
AGC |
|
|
| OFF |
|
|
| ||
|
|
|
|
|
•Internal sync (INT)/Line lock (LL) setting
•Electronic iris (EI)/Auto iris (AI) setting
•Backlight compensation (BLC) setting
•Automatic gain control (AGC) setting
Iris function setting
Use a manual or fixed iris lens and set the lens
aperture to the shortest F stop. Set the EI/AI EI AI switch to EI position.
☞When using an
Note:
•The electronic iris is suitable for normal indoor use. When the EI/AI switch is set to the EI position, do not use an
•If used under fluorescent light, the image may flicker. In such a case, change to incandescent lighting or set the EI/AI switch to the AI position and use an
•When shooting bright subjects, pay attention to the light angle in order to avoid or minimize the smear phenomenon effect.
•If conditions are outside the electronic iris operation range or more than the maximum illumination, it will cause saturation of the CCD. In that case, use a manual iris lens.
10 English