Sanyo VCB-3574IR instruction manual Specifications

SPECIFICATIONS

Scanning system	: EIA standard (525 TV lines, 30
	frames/sec.)
Interlace	: PLL 2:1 interlace
Image device	: 1/2 inch solid state image device CCD
Picture elements	: 811 (H) x 508 (V)
Effective picture elements	: 768 (H) x 494 (V)
Synchronizing system	: Line lock/External sync (Automatic
	switching)
Resolution	: 570 TV lines horizontally, 350 TV
	lines vertically
Video output level	: 1.0 Vp-p/75 ohms, composite
Video S/N ratio	: More than 50 dB
Minimum required	: Approx. 0.02 lux with a F 1.2 lens,
illumination	approx. 0.03 lux with a F 1.4 lens
(incandescent lighting)
Backlight compensation	: Manual ON/OFF switching, zone light
	measuring system
	(Active when using an auto-iris lens)
Electronic iris function	: Manual ON/OFF switching
Electronic iris range	: 0.02 lux to 10,000 (F 1.2, lens)
	0.03 lux to 15,000 (F 1.4, lens)
Flange-back	: 12.5 mm ± 0.8 mm
Gamma correction	: γ = 0.45
Lens mount	: CS mount (or C mount with the
	supplied adaptor)
Environmental conditions	: Temperature: –10˚C ~ +50˚C
	Humidity: less than 90% (no
	condensation)
Power supply	: 24 V AC, (–4 to +4 V) 60 Hz

Power consumption		: 3.1 W (with auto iris lens)
		2.4 W (without auto iris lens)
Weight		: Approx. 330 g (without lens)
Dimensions
	108.5		56
1.5	99.5
		VIDEO OUT	VS IN	POWER
		45	SEE INSTRUCTION MANUAL
		LINE
		PHASE
		CLASS2WIRING	24V AC GND	24V AC
	11
12	1/4”–20 UNC		28
22

Features and specifications are subject to change without prior notice or obligations.

SERVICE

This camera is a precision instruments and if treated with care, will provide years of satisfactory performance. However, in the event of a problem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre.

English 13