Sanyo VCB-9324 CONNECTIONS AND INSTALLATION, Connecting the coaxial cable horizontally, Connecting the coaxial cable vertically (using the vertical holder plate)

CONNECTIONS AND INSTALLATION

Connecting the coaxial cable horizontally

1Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated.

2Attach the coaxial cable to the base.

Loosen the VIDEO OUT terminal screw (A) and the GND terminal screw (B), then insert the center wire of the coaxial cable in the VIDEO OUT terminal and make sure the shielding mesh part of the cable is located into the GND cable clamper, then tighten both screws (A and B) to attach the cable.

Connecting the coaxial cable vertically (using the vertical holder plate)

1Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated.

2Loosen the VIDEO OUT terminal screw and remove the GND terminal screw.

3Insert the coaxial cable into the GND terminal clamp (a), then attach the clamp to the supplied vertical holder plate (b) using the screw (c) from the second GND terminal.

4Attach the vertical holder plate to the GND terminal using the terminal screw, then insert the centre wire of the coaxial cable into the VIDEO OUT terminal and tighten the terminal screw.

1

1

(Return the shielding mesh here)

A

B

2

c

a

b

6 English