English Français Deutsch 中文简体
For US and Canadian Users
Safety Guard
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE■CAMERA CONNECTIONS / SETTINGS
Do not connect the power cord until all other connections have been completed.
The camera comes
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
For the customers in CanadaThis Class B digital apparatus complies with Canadian
Cet appareil numerique de la Classe B est conforme à la norme
This installation should be made by a qualified service person and should conform to all local codes.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
1
VIDEO OUT
BNC type
2
2 | INT | L L 1 | |
| |||
| OFF BLC | ON | |
|
| ||
3 | AGC |
| |
LINE | 1 | ||
4 | |||
PHASE |
2LEVEL 
GND
AC24VThicker than 18 AWG
To prevent a fire hazard use any UL listed wire rated1Sync setting (LL/INT)
INT: Internal sync
LL:
•If the vertical roll cannot be corrected by adjusting the PHASE dial on the second and subsequent cameras, try adjusting the PHASE dial on the first camera. If it still cannot be corrected, please check that the polarity of the power cords of all connected devices is correct.
2Iris setting (EI ON/OFF)
EI ON: Electronic iris (manual or fixed iris lens) - For indoor use
EI OFF: Auto iris
NOTE on Electronic iris setting (EI ON):
• | Set the lens aperture to the shortest F stop. |
• | If fluorescent lighting is used where the camera is installed, the object will |
| flicker as a result. This type of phenomenon can be avoided by replacing the |
| fluorescent lighting with incandescent lamps. |
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. |
– Increase the separation between the equipment and receiver. |
– Connect the equipment into an outlet on a circuit different from that to |
+ –
• If the light entering the lens exceeds the maximum required illumination, the |
image cannot be displayed properly. In that case, manually adjust the lens iris. |
NOTE on Auto iris setting (EI OFF):
which the receiver is connected. |
– Consult the dealer or an experienced radio/TV technician for help. |
This device complies with Part 15 of the FCC Rules. Operation is |
subject to the following two conditions: (1) This device may not cause |
harmful interference, and (2) this device must accept any interference |
received, including interference that may cause undesired operation. |
Changes or modifications not expressly approved by Sanyo may void |
the user's authority to operate this camera. |
Thicker than 18 AWG
Check that polarity is correct.• If the entire image is too dark or too bright, adjust the contrast using the LEVEL dial.
3Backlight compensation (BLC ON/OFF)
For EU Users
Please note:Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their
Please dispose of this equipment at your local community waste collection/recycling centre.
In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!
This symbol mark and recycle system are applied only to EU countries and not applied to countries in other areas of the world.
SANYO FISHER Sales (Europe) GmbHStahlgruberring 4,
For Russian Users
This product certified by official certification company 
which is authorized by Russian Federation.
ДЛЯ ПОЛЬЗОВАТЕЛЕЙ РОССИЯ Данная продукция сертифицирована официальным органом по сертификации Российской Федерации.
1Threaded holes for mounting (Top and Bottom)
•When using a camera mount base (sold separately) etc., use an attachment screw shorter than 10 mm / 0.4 in. Otherwise, it may damage internal parts of the camera.
•If you want to use a commercially available platform for the camera, select an appropriate type, taking into consideration the gross weight of the camera and platform, and secure it on a firm place.
•Images may blur under extremely bright lighting; adjust the lighting angle to get clear images.
2Supported coaxial cables:
Following coaxial cables are also supported.
•
•Using different cables from these specified here may attenuate the video and/or sync signals and interfere with correct transmission.
| BLC OFF | BLC ON (Only when using an auto iris lens) |
4Automatic Gain Control (AGC ON/OFF)
AGC ON: For automatically adjusting the sensitivity of the camera in dark environments.
AGC OFF: Fixed Gain is adopted for pictures with less video noise under low light conditions.
Casino mode for VCC-5884EA:
This produces the best picture with a manual or fixed iris lens especially under halogen lights, such as in a casino.
•White balance is adjusted automatically for best results under halogen light (Color temperature: approx. 3000°K).
Do not use under fluorescent light or sunlight (approx. 5000°K). A bluish image may be produced.
•Gamma Curve makes dark parts of the image brighter.
If the picture is out of focus at the telephoto position, adjust the