INSTALLING THE BATTERY PACK AND CARDInstall the card

The card can be used after it has been formatted with the camera (page 142).

1 Open the battery/card compartment cover.

2 Insert the card.

hFirmly insert the card until it clicks into place.

1Open 2 Insert

Card slot

3 Close the battery/card compartment cover.

<When removing the card...>

hTo remove the card, press it down, and then release. The card will protrude slightly, and you can then pull it out.

1Open

2 Push

3 Pull out

CAUTION

Do not attempt to forcibly remove the card.

i Never remove the card when the multi-indicator is flashing red. In doing so, you risk losing the data stored in the card.

HINT

Shooting without a card installed

i When a card is installed, images are recorded to and played back from the card. When no card is installed, images are recorded to and played back from the camera’s internal memory. When the camera is turned on with no card installed, the internal memory icon is shown on the monitor to let you know that the images you capture will be saved to the camera’s internal memory.

25English