SETTING THE CONNECTION MODE
3 Select “COMPUTER”, and press the

 

 

 

 

 

 

 

 

USB CONNECTION

 

SET button.

 

 

 

 

 

 

h The screen to select the computer

 

 

 

CARD READER

 

 

connection mode appears.

 

 

 

MTP

 

 

CARD READER:

 

 

 

SCREEN CAPTURE

 

 

 

 

 

PC CAMERA

 

 

Use the camera as an external drive

 

 

 

 

 

 

 

 

CANCEL

 

 

of the computer.

 

 

 

 

 

 

 

 

 

 

 

MTP:

 

 

 

OK

Connect the camera in the MTP mode to a Windows Vista computer.

SCREEN CAPTURE:

Save an image of the computer screen in your camera.

PC CAMERA:

Use your camera as a PC camera.

4 Select the desired connection mode, and press the SET button. <If the access menu (page 168) appears>

hIf you do not wish to access the website, click on [Exit] to cancel the access menu.

CAUTION

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables. i Please connect the dedicated USB interface cable to your computer’s USB

connector. Do not connect it to the USB port on your monitor or keyboard, or to the USB hub. Be especially careful when installing the driver software. In some instances, it may not be possible to correctly install the driver software.

Do not exchange data bi-directionally

i While copying data from the camera to the computer in the card reader mode, do not perform any operation that would copy the computer data to the camera.

159English