Sanyo VPC-CG9, VPC-CG9EX, VPC-CG9GX How to use Screen Capture, SAVE AN IMAGE OF YOUR COMPUTER SCREEN, HINT, 2 Run Screen Capture, 4 Press the [ ] button, <To quit Screen Capture

SAVE AN IMAGE OF YOUR COMPUTER SCREENHow to use Screen Capture1 Set the camera to the screen capture mode (page 158).2 Run Screen Capture.

hScreen Capture is automatically launched when you start your

computer.

<To quit Screen Capture>

hRight-click on [SANYO Screen Capture 1.1] in the task tray, and then

left-click on [Exit]. When the screen to confirm appears, left-click on [Yes].

hTo launch Screen Capture again, click [Start]→[Programs]→[SANYO Screen Capture 1.1].

3 On the computer’s monitor, display the window you wish to save.

hMake the window you wish to save the active (selected) window.

4 Press the [ ] button.

hThe currently displayed active window is saved in the camera’s memory.

hWhen there is no active window, the entire screen display is saved. h The saved file is stored in the \DCIM\***SANYO folder in the drive for

the camera.

h To exit Screen Capture, quit the application.

HINT

i To use Screen Capture, only one camera should be connected to the computer.

i The maximum file size that can be saved for any one screen capture is

12 MB.

iWhen running Screen Capture, do not turn off the camera or remove the card from the camera, as doing so may result in the loss of data. Also, do not use the computer to process the contents of the files in the camera’s card, or the camera may not operate normally.

171English