Camera Setup 17
Charging the Battery
1. Insert the battery into the camera and connect the DC power supply cable with the power adapter as shown in the picture.
2. Connect the power adapter to a live household outlet to start charging. The power LED will blink during the charging process.
3. Disconnect the DC power supply cable when the charging is done. When the charging is done, Power LED turns off.
Charging the Battery with USB power
1.Turn the power off and connect the USB cable with the camera and the computer.
2.The power LED will blink during the charging process.
3.The power LED will turn off automatically when the charging is done.
4.Disconnect the USB cable.
Note:
1.The room temperature suitable for charging the camera is 6°C ~ 36°C. Power LED blinks during the charge and turns off automatically after the charge.
2.The battery does not charge when room temperature exceeds 36°C or falls below 6°C. Power LED will blink faster. The battery does not charge again automatically even when the temperature comes back to 6°C ~ 36°C, once the charge stops by higher or lower temperature.
3.To recharge the battery, plug out the DC power supply cable or USB cable and plug in again by increasing or decreasing the temperature of the battery and the camera when room temperature is not suitable for charging.
English
Charging the Battery