Sanyo VPC-E1090 Turning On, First Time Use, POWER, POWER, POWER, UP/DOWN, Language, Date and Time

English

18 Camera Setup

Turning On

Press and hold the POWER button to turn on the camera. To turn off the camera, press the POWER button again.

First Time Use

Press the POWER button as described in “Turning On” on page 18, a welcome screen displays momentarily on the LCD screen.

If the camera is turned on for the first time, the Language menu pops up automatically after powering on the camera. Press the OK button and select the desired language by UP/DOWN navigation buttons, then press the OK button to confirm.

After the desired language is selected, the Date and Time menu pops up. Press the OK button. Select each field and adjust the value using the navigation buttons. Press the OK button to confirm.

ENGLISH

DEUTSCH

FRANçAIS

ITALIANO

LANGUAGE

Press OK when done

(Year)

2009 / 02 / 01 12 : 00

DATE & TIME

Note:

If the Date and Time is reset (when running out the battery and not in use for a long period), the Date and Time setup screen displays automatically.

Turning On