English 36

SETUP
Turning on the camera when the power save (sleep) mode is active
In order to preserve battery pack power, the power save (sleep) function will
automatically turn off the camera after about 1minute of no use during
shooting, or about 5minutes of no use during playback (factory-preset
setting).
iWhen the power save mode is active, you can restore the power by any of
the following methods:
hPress the ON/OFF button.
hPress the [ ] or [ ] button.
hOpen the monitor unit.
hPress the SET button.
hWhen the MENU button is used to turn on the camera, the screen to
set the operation sounds appears.
iAfter the power save mode has been active for about 1hour, the camera
will switch to the standby mode. In this case, you can restore the power by
pressing the ON/OFF button, or by closing and then opening the monitor
unit.
iWhen the AC adaptor is connected, the power save mode will become
active about 5minutes after the camera is turned on (factory-preset
setting).
iThe user can specify the time elapsed before the power save mode is
activated (page128).
iWhen the camera is connected to a computer or printer, the power save
mode becomes active after about 12hours.