For Windows 2000 users (except for the SDXC card)

Mounting your camera

1 Set the camera to the card reader mode (page 143).

hIf a message appears on the computer monitor instructing you to load

the Windows CD-ROM, follow the instructions and install the driver.

hThe camera is recognized as a drive, and [Removable disk] appears in the [My Computer] window.

hThe card is recognized (mounted) as a disk.

Dismounting the camera

CAUTION

i To disconnect your camera, be sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or loss of card data.

1 Left-click on [Unplug or Eject Hardware] in the task tray.

hA list appears showing the devices connected to the computer’s USB connector.

2 Left-click on the camera drive.

hThe [Safe to Remove Hardware] dialog box will open.

3 Click on the [OK] button.

hYou can now disconnect the camera.

147English