SCREEN CAPTURE

Individual windows on your computer’s monitor display can be saved in the camera.

1 Set the camera to the SCREEN CAPTURE mode (page 143).

2 Run Screen Capture.

hScreen Capture is automatically launched when you start your

computer.

<To quit Screen Capture>

hRight-click on [Xacti Screen Capture 1.1] in the task tray, and then left- click on [Exit]. When the screen to confirm appears, left-click on [Yes].

hTo launch Screen Capture again, click [Start]→[Programs]→[Xacti Screen Capture 1.1].

3 On the computer’s monitor, display the window you wish to save.

hMake the window you wish to save the active (selected) window.

4 Press the [ ] button.

hThe currently displayed active window is saved as a JPEG file in the camera’s memory.

hWhen there is no active window, the entire screen display is saved. h The saved file is stored in the \DCIM\***SANYO folder in the drive for

the camera.

h To exit Screen Capture, quit the application.

HINT

i To use Screen Capture, only one camera should be connected to the computer.

i The maximum file size that can be saved for any one screen capture is

10 MB.

iWhen running Screen Capture, do not turn off the camera or remove the card from the camera, as doing so may corrupt the files. Also, do not use the computer to process the contents of the files in the camera’s card, or the camera may not operate normally.

PRINTER A TO CONNECTING

English 162