11 English

Setting to the card reader mode

1Start your computer, and use the supplied USB interface cable to
connect the docking station to the computer.
hConnect the docking station’s USB/AV terminal to the computer’s USB
connector.
2Press the ON/OFF button to turn the camera on, and set the camera
in the docking station.
hThe USB Connection Screen appears on the camera’s monitor.
3Select “CARD READER”, and press the SET button.
hWhen the camera’s monitor unit is closed and the camera is set in the
docking station, press the operation mode button [ ] on the docking
station.
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
To USB connector on the computer
Supplied dedicated USB interface cable
iInsert the plug with the [n] mark facing up.
USB/AV terminal
To AC adaptor