13 English
For Windows XP users
Mounting your camera
1Set the camera to the card reader mode (page 11).
hThe message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
hThe card is recognized (mounted) as a disk, and the [XACTI HD1A
(E:)] window opens.
* The drive name (E:) may be different on your computer.
2Select an action.
hSelect the desired procedure from the [XACTI HD1A (E:)] window.
Dismounting the camera
CAUTION
iTo disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1Left-click on the icon for safely removing hardware.
hA list appears showing the devices connected to the computer’s USB
connector.
2Left-click on the camera drive (E:).
hThe camera can now be disconnected.
* The drive name (E:) may be different on your computer.