SPECIFICATIONS
Xacti Library compatible hard disks
A hard disk that meets the following conditions can be used with the Xacti Library.
i USB 2.0 compatible
A USB 1.x compatible hard disk cannot be used. i Powered by self power
A hard disk that is powered through the USB cable (bus power) cannot be used.
i Please back up your files!
As a precaution against losing data in case of a problem with your hard disk that prevents you from accessing your saved files, it’s a good practice to regularly make backup copies, on a DVD for example, of the files in the hard disk you are using for the Xacti Library.
Sanyo Electric shall not be held responsible for loss of files/data due to failure of your hard disk.
i Hard disks initialized in the FAT32 format only
Only a hard disk that has been initialized in the FAT32 format can be used with the Xacti Library. Hard disks initialized in other formats cannot be used.
i For a disk with multiple partitions
It is recommended that an unpartitioned disk be used. In case of a partitioned disk, only the higher priority partition can be used. Other disk partitions cannot be used. For example, in a hard disk having D: and E: partitions, only the “D:” partition can be used for the Xacti Library.
i What is the maximum capacity?
A maximum 1 TB hard disk can be used.
Additional information can be found on the Sanyo website at
APPENDICES
English 34