Sanyo Copy data from your camera to the computer

Copy data from your camera to the computer

Connect your camera to a computer, and copy the desired data to the computer.

1 Turn on the computer, and use the supplied dedicated USB interface cable to connect your camera to the computer.

hConnect the cable between the camera’s USB terminal and the computer’s USB connector.

Camera on/off switch

• OFF

Push

To USB terminal

Supplied dedicated USB interface cable	Computer power switch
	• ON
To USB connector on the computer

<Insert and pull out the cable and USB plug carefully>

i When connecting the cables, make sure that the plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the terminal or the camera.

i If excessive force is used to pull the USB plug, it may damage the cable and/or connector.

English x