English

20 Getting Started

3. After taking a photo, the Self-timer automatically exit. If you want to use these functions

for the next photo, press the RIGHT/SELF-TIMER/BURST MODE navigation button again to activate the function.

Note:

: Burst Mode - Take photos until shutter is released or memory is full.

: Multi-Burst Mode - 16 photos continuously by 1 press of the Shutter button.

Using the AEB (Auto Exposure Bracketing) Function

When using the AEB (Auto Exposure Bracketing) function, the camera auto-matically takes 3 consecutive photos with different exposures by pressing the SHUTTER button once. For example, when the current EV compensation value is +1.0 EV and the AEB bracket interval value is set to ±0.3, the camera takes shots of the same scene with 3 varying levels of exposure: +0.7 EV, +1.0 EV, and +1.3 EV.

This function is only available in Auto, P-Mode. To set the AEB mode:

1.Press the MENU button to display menu options.

2.Press the LEFT/RIGHT navigation buttons to select AEB setting and press the OK button.

3.Press the UP/DOWN navigation buttons to select from the available options:

•AEB: Select to enable (ON) or disable (OFF) the AEB function.

•BRACKET: Select to set the bracket interval value ranging from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.

AEB

OFF

BRACKET

0.3EV

EXIT

 

AEB

• EXIT: Select to apply new settings to the camera and return to the setup menu.

Note:

1.When taking AEB shots, hold the camera steadily. For the best result, use the tripod.

2.Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.

Taking your First Photo