Sanyo VWM-900 Setting The Setup Menu, Channel Selection, Auto Channel Programming

SETTING THE SETUP MENU

1Press MENU and the MAIN menu will appear.

2Press v or V to select the SETUP menu, then press ENTER. The SETUP menu will appear.

3Press v or V to choose the desired item on the SETUP menu. Then press b or B to choose a desired setting.

FUNCTION OSD

The onscreen display of this VCR can be turned on or off.

•The FUNCTION OSD is switched between ON and OFF by pressing b or B.

LANGUAGE SELECT

The onscreen programming of this VCR can display in either English, Spanish, or French.

•The LANGUAGE SELECT is switched among ENGLISH, ESPANOL, and FRANCAIS by pressing b or B.

AUDIO MODE DISPLAY

The VCR has two separate audio playback systems, the high quality VHS Hi-Fi system and the standard NORMAL mono sys- tem. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) chan- nels, and the NORMAL system plays monaural sound. The nor- mal track is always played, so the cassette can be played on a VCR that does not have VHS Hi-Fi.

•The AUDIO MODE is switched between HI-FI and NORMAL by pressing b or B.

BROADCAST TYPE (STEREO/SAP/MONO)

Multi-channel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position.

For normal operation, the display should be in the STEREO posi- tion. The VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasting, changing the dis- play to mono may give clearer sound.

•The BROADCAST TYPE is switched among STEREO, SAP, and MONO by pressing b or B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Use this function during playback [when AUDIO MODE display (HI- FI/NORMAL) is in HI-FI position] for selecting the audio output sig- nals from the AUDIO OUT terminals (L ch and R ch), and RF OUT (VHF/UHF/CATV).

This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

•The AUDIO OUTPUT is switched among STEREO, LEFT, and RIGHT by pressing b or B.

TV Gurdian SETUP

Details are on page 9.

CHANNEL SELECTION

This VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69, and CATV channels 1-125.

PREPARATION

•Connect the VCR to the desired type of antenna or cable TV system, as shown in ANTENNA TO VCR CONNECTIONS .

AUTO CHANNEL PROGRAMMING

1Press MENU and the MAIN menu will appear.

2Press v or V to select the TUNING menu, then press ENTER. The TUNING menu will appear.

3Press V to choose the SOURCE SELECT item, then press b or B to select TUNER.

•Press b or B repeatedly to switch among TUNER, LINE1, and LINE2.

4Press v or V to choose AUTO CHANNEL SET, then press b or B to set the channel.

•The tuner will automatically cycle through all available channels (TV/CATV) in the area and place them in the tuner’s memory.

•After the AUTO CHANNEL SET PROCEEDING is com- plete, the TUNING menu will hide and return to the TV screen automatically.

5Make sure the TUNING BAND is set appropriately (TV or CATV).

•TV : If you are using a standard antenna to receive channels.

CATV : If you are using basic cable to receive channels.

•Change the setting of TUNING BAND to check the TV channels.

•Use CH/TRACK(v / V) on the remote control or CHANNEL (V / v) on the front panel to cycle the VCR through the channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from memory manually.

1 Press V to choose CH. ADD/DEL on the TUNING menu. Press b or B to select a channel to add or erase.

2 Press ENTER to add or erase the channel.

Repeat steps 1 and 2 to add or erase more channels.

3Press MENU to return to the TV screen.

7