SATO CG412, 408 manual USB and RS232C interface on-board

Communication Interfaces
The CG4 is available in the following 3 configurations
USB and RS232C interface on-board		To connect printer to the host computer using	The built-in interfaces of LAN or serial or parallel or
		the USB interface.	USB as standard makes it easy to switch between
			applications.
USB and LAN interface on-board		To connect printer using LAN interface and
		establish direct communication with host
		computer system on Local Area Network
USB and IEEE interface on-board		To connect printer to the host computer using
		IEEE interface interface.
		Or, to connect the SATO Keypad, Scanner or
		Smart keyboard to the printer.
		To connect printer to the host computer using
		the USB interface.
Media Guide and Sensing
ƒ	Media guide	The media guide allows the media to feed	Support for a greater range of media types.
ƒ	I-Mark/ Gap sensor	properly.
		Media sensors detect the I-Mark (or black
		mark) on the media, or gap of the label in order
		to precisely position the print data on the
		media.
		The CG4 printer is equipped with a gap or
		transmissive sensor, an I-Mark or reflective
		sensor, and a reflective ribbon out sensor.

CONFIDENTIAL. VERSION: S-CG4-01rA-01-2010PG © 2010 SATO Corporation. All rights reserved.