Troubleshooting
42
3
hhhh Loading PaperNote
❒If you want to change the paper
size, see p.48 “Changing the Paper
Size”.
Reference
Regarding paper types a nd sizes
that can be used, see p.12 “Copy
Paper”.
A
AA
AMake sure that the paper tray is
not being used.
B
BB
B
Pull out the paper tray until it stops.
C
CC
CPush the metal plate down, and
then square the paper and load it
in the tray.
Important
❒Do not stack paper over the lim-
it mark.
❒If paper is left in the paper tray
and then you add pa per, a mis-
feed might occur.
Note
❒Shuffle the paper before setting
it in the tray.
D
DD
DPush the paper tray in until it
stops.
Loading paper in the optional
paper tray unit
A
AA
AMake sure that the optional paper
tray unit is not being used.
B
BB
BPull out the paper tray until it
stops.
C
CC
CWhile pinching the release lever,
adjust the back fence and side
fences.
D
DD
DPush the metal plate down, and
then square the paper and load it
in the tray.
Important
❒If paper is left in the paper tray
and then you add pap er, a mis-
feed might occur.
❒Do not stack paper over the lim-
it mark.
❒Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.